2.5 GHz城市环境电磁态势的计算与补偿

复杂城市空间的电磁态势分布可以通过电磁场数值计算的方法进行预测。文章使用矩量法(MOM)结合一致性几何绕射理论(UTD)的方法对2.5 GHz频率下某小区环境中的电磁态势进行了仿真计算以及实际测量。场景中的树木结构在此频率下显示出比较强烈的波动性,对电磁仿真计算结果产生了不可忽略的影响,文中将其对仿真计算结果的影响进行了单独建模仿真,给出其产生影响的经验值,对仿真结果进行修正。修正结果与测量结果对比证明该经验值在该频率下可以有效补偿计算结果的缺失。     

5G基站供配电勘察设计思路的调整分析

针对5G基站设备相对于以往2G/3G/4G设备的变化,面向一线勘察设计人员,阐述5G基站在供配电需求方面功耗增大、供电方式多样化、供配电改造工作量和难度加大等相应变化,归纳相应的勘察前期准备工作要点,分析在实际工作中可能面临的外市电引入改造、供电方式选择的多样性、新型锂电池应用等重点、难点,介绍理想的5G供配电模式及发展方向,最后提出5G基站供配电勘察设计工作思路调整的建议。     

Two-dimensional temperature distribution estimation for a cross-flow planar solid oxide fuel cell stack

The uniform temperature distribution of a cross-flow planar solid oxide fuel cell (SOFC) stack plays an essential role in stack thermal safety and electrical property. However, because of the strict requirements in stack sealing struture, it is hard to acquire the temperature inside the stack using thermal detection devices within an acceptable cost. Therefore, accurately estimating the two-dimensional (2-D) temperature distribution of the cross-flow stack is crucial for its thermal management. In this paper, Firstly, a 2-D mechanism model of a cross-flow planar SOFC stack is established. The stack is divided into 5*5 nodes along the gas flow directions, which can reflect the stack states with moderate computational burden. Then, experimental test data is utilized to modify and validate the stack model, guaranteeing the model accuracy as well as the reliability of model-based state estimator design. Finally, easily-measured stack inputs and outputs are selected, and a temperature distribution estimator combined with unscented kalman filter (UFK) approach is developed to achieve accurate and fast temperature distribution estimation of a cross-flow SOFC stack. Simulation results demonstrate that the UKF-based temperature distribution estimator can precisely and quickly achieve the temperature distribution estimation of the cross-flow stack under both static state and dynamic state changes and is applicable to cross-flow stacks with different size or cell number as well, the maximum estimated absolute error is less than 0.15 K with an absolute error rate of 0.015%, which indicates the developed estimator has good estimation performances.     

First principles computational studies of spontaneous reduction reaction of Eu(III) in eutectic LiCl‐KCl molten salt

Using first principles calculations, we study fundamental mechanism of spontaneous reduction reaction of Eu³⁺ to Eu²⁺ in eutectic LiCl‐KCl molten salt. We decouple the reaction Gibbs free energy into enthalpy and entropy contributions by using rigorous thermodynamic formalism. Key structural features of the solvation shell are characterized by the radial distribution function and the coordination number. Compared with Eu²⁺, the Eu³⁺ ion has a more rigid framework of the solvation shells, corroborating its stronger electrostatic interaction with neighboring ligands of Cl^? ions and a more favorable state on the aspect of enthalpy. Computations on vibrational frequency, however, pose significant contribution of vibrational entropy to the reaction Gibbs free energy for the reduction. Vibration frequency of Eu²⁺ is smaller than that of Eu³⁺, driving a more positive change of the entropy in the reduction reaction. Furthermore, an Eu²⁺ diffuses more quickly than an Eu³⁺ in the LiCl‐KCl molten salt with switching mechanism of ligand Cl^? ions in the solvation shell. Our results propose that the spontaneity of the reduction reaction is driven by the entropic contribution by overcoming the penalty of the reaction enthalpy.     

New exact solutions of the Tzitzéica-type equations in non-linear optics using the expa function method

One specific class of non-linear evolution equations, known as the Tzitzéica-type equations, has received great attention from a group of researchers involved in non-linear science. In this article, new exact solutions of the Tzitzéica-type equations arising in non-linear optics, including the Tzitzéica, Dodd–Bullough–Mikhailov and Tzitzéica–Dodd–Bullough equations, are obtained using the exp_a function method. The integration technique actually suggests a useful and reliable method to extract new exact solutions of a wide range of non-linear evolution equations.     

Beta-Binomial删除信道中的喷泉码文件传输协议

由于命名数据网络(NDN,Named-Data Networking)无环路、逐包、逐跳转发的特点,使得数据包回传成功率降低,而传统的TCP/IP协议中的ARQ和ACK机制对于多播会话不再适用.由于NDN中的传输信道可以等效为二进制删除信道,因此可以通过应用层编码来实现文件的可靠传输.传统的信道编码技术如卷积码、级联码和RS码等复杂度较高,而将NDN与低复杂度的喷泉码的结合可以实现分布式的存储架构,因而可通过喷泉编码在应用层协议中实现可靠的纠删机制,保证整体文件的传输可靠性.以往的研究一般是基于确定的删除概率信道模型,但是由于网络的异构性和信道噪声等因素影响,可能会造成信道丢包概率呈随机性分布.因此,本文在Beta-Binomial分布模型的前提下,根据贝叶斯统计的先验信息和中心极限定理,对随机概率下的纠删信道的文件可靠传输协议进行了数学建模和理论推导.仿真结果显示此模型更具有普适性,此传输协议可在信道状况未知的前提下从理论上求出最小发包数,减少冗余编码包,提高文件整体的投递成功率,在保证传输可靠性的同时有效提升协议传输效率.     

A Voltage Control Method for a Distributed Line Feeder by means of Multiagent Approach

This paper proposes a method for the coordinated control of power factor by means of a multiagent approach. The proposed multiagent system consists of two types of agent: single feeder agent (F_AG) and bus agent (B_AG). In the proposed system, an F_AG plays as an important role, which decides the power factors of all distributed generators by executing the load flow calculations repeatedly. The voltage control strategies are implemented as the class definition of Java into the system. In order to verify the performance of the proposed method, it has been applied to a typical distribution model system. The simulation results show that the system is able to control very violent fluctuation of the demands and the photovoltaic (PV) generations.     

攀西钒钛磁铁矿尾矿制备储水泡沫陶瓷的研究

以攀西钒钛磁铁尾矿和废玻璃为主要原料通过高温烧结法制备储水泡沫陶瓷，研究原料配比和发泡剂（SiC）添加量对材料性能的影响。结果表明:随着钒钛磁铁矿尾矿含量的增加，材料的体积密度及抗压强度逐渐增大，平均气孔孔径逐渐减小；当尾矿添加量为50 wt%，材料的体积吸水率出现极值。当SiC添加量为0.3 wt%，材料内部气孔分布均匀，平均孔径约为2.93 mm。最终以50.0 wt%的钒钛磁铁矿尾矿和50.0 wt%的废玻璃为原料，外加3.0 wt%的石英，0.3 wt%的SiC，3.0 wt%的Na3PO4，在1040℃下制得性能最优的储水泡沫陶瓷，材料的体积密度为0.26 g/cm-3、体积吸水率为56.5%和抗压强度为0.68 MPa。采用SEM、XRD等检测手段研究材料的微观形貌及物相组成，结果表明储水泡沫陶瓷内部由三维立体结构组成，有利于储存水分；材料主要物相包括硅灰石、长石、透辉石和钛铁矿。      

船体结构冰载荷反演方法及试验验证

冰载荷是影响船舶冰区航行期间结构安全的重要环境载荷。船舶的冰压监测通常采用应变传感器，合理地布放传感器是识别冰载荷的基础。通过对比船体外板结构试验中的冲击载荷和不同测试方案下的应变信号，确定了最佳应变传感器布放方案；采用Green核函数方法建立了船体外板结构应变冲击载荷间的响应关系，并对采集信号在噪声影响下反演的不适定性进行了分析；采用Tikhonov正则化方法克服了载荷反演过程中出现的数值不稳定问题；最后将试验中的响应用到载荷识别分析中，反演的载荷可以较为准确地反映冲击载荷的时域特征并且载荷识别精度良好。     

多晶硅生产中残液搅拌罐密封结构的改造

在处理多晶硅生产中产生的残液时,残液搅拌罐填料密封出现泄漏,针对此问题提出了优化措施,达到了预期效果。